The World of Polymers Continues to Expand in 3D Printing

Last updated on 9 October 2026

Interview with Dario Negrelli Pizzigoni, Founder of TreeD Filaments, a Company with Years of Experience in the 3D Printing Industry

We had the pleasure of speaking with Dario Negrelli Pizzigoni, Founder of TreeD Filaments, to gain an overview of the world of polymers and their applications in 3D printing.

The company’s vision has always been to bring as many different polymers as possible into the world of 3D printing.

Types of Polymers Used in 3D Printing: Traditional, Engineering, and High-Performance Plastics

To simplify, polymers can be divided into three main categories.

The first includes traditional polymers, such as ABS, polystyrene, and other commonly used plastic materials.

The second category consists of engineering polymers, which offer improved performance compared to conventional plastics. Examples include nylon and polycarbonate.

Finally, there is the family of high-performance engineering polymers, also known as super engineering plastics.

Dario explains:

“Polymers are generally classified into families for convenience, because several different materials can be derived from the same molecule. For example, starting from styrene, it is possible to obtain ABS and different types of polystyrene.

The leading material in the high-performance polymer category is PEEK (Polyether Ether Ketone).

However, other materials are becoming increasingly interesting. Manufacturers tend to promote these alternatives because they are easier to 3D print, even though they do not offer the same performance as PEEK.”

Sustainable Polymers for 3D Printing: Bioplastics and Recycled Materials

“At this particular moment, bioplastics and recycling are especially relevant topics, and these are areas to which we have always paid great attention.

Recycled plastic materials are commonly referred to as regenerated materials, and there are two main ways to obtain them.

The first is traditional mechanical recycling, which is used, for example, for plastic bottles. This process is particularly suitable for industrial production, but it is not always ideal for manufacturing 3D printing filaments.

The second method is chemical recycling, for which materials such as nylon and polyester are particularly suitable,” Dario continues.

“The paradox is that PLA is not biodegradable in the way many people believe, but rather compostable under specific conditions. Materials derived from corn starch can be genuinely biodegradable, although their technical performance is not always excellent.

There are also extremely high-performance polymers, but at present they do not necessarily guarantee a high level of sustainability.

Materials with properties superior to PEEK already exist, but they cannot yet be processed using traditional manufacturing systems.”

PEEK vs. PPS: Comparing High-Performance Polymers for 3D Printing

Drawing on his extensive experience in the polymer industry, Dario discusses the characteristics of other advanced materials, including PPS (Polyphenylene Sulfide) and ULTEM (Polyetherimide, PEI).

“PPS is less expensive than PEEK.

In many applications where PEEK is traditionally used, PPS can replace it without significant problems because the two materials share many characteristics.

Both are inherently flame-retardant, meaning they have excellent self-extinguishing properties, a characteristic found in relatively few polymer materials.

They also offer excellent resistance to chemical attack and hydrolysis, including prolonged exposure to water.

Both materials are extremely rigid. However, PEEK offers slightly better heat resistance than PPS, approximately 220°C compared to 200°C.

It is important to consider that a large number of industrial applications operate at temperatures below 200°C.

Another advantage of PEEK is its greater impact resistance.

The two materials are remarkably similar, and their commercial market penetration often makes the difference.”

ULTEM (PEI) in 3D Printing: Properties and Advantages

“ULTEM is also an excellent high-performance polymer, offering a very good price-to-performance ratio.

It was introduced into the 3D printing market by Stratasys and is easier to print because it is an amorphous material.”

As an amorphous polymer, ULTEM (PEI) is generally easier to process than many semicrystalline high-performance polymers.

Unlike semicrystalline materials, amorphous polymers do not have a precise melting temperature. Instead, they soften progressively over a temperature range, making their processing behavior different.

Polymers can generally be divided into two categories:

  • Amorphous polymers, such as PEI (ULTEM).
  • Semicrystalline polymers, such as PEEK and PPS.

Semicrystalline polymers can offer superior mechanical, thermal, and chemical resistance in certain applications.

Increasing the degree of crystallinity can improve specific material properties and performance.

An example of technological progress in polymer processing can be found in plastic water bottles.

Early plastic water bottles weighed approximately 65 grams, while modern versions can weigh as little as 18 grams, thanks to improvements in material properties, processing technologies, and product design.

PEEK in Additive Manufacturing: Crystallinity and Cooling Temperature

PEEK is a high-performance thermoplastic polymer whose structure and properties can be significantly influenced by processing and cooling conditions.

When melted, PEEK can be shaped into the desired form. Depending on the cooling process, the resulting material may exhibit different degrees of crystallinity.

Dario explains:

“When 3D-printed PEEK components appear amber-colored and almost transparent, it is because they have been cooled very quickly, for example at around 120°C, which is considered a relatively low temperature for this type of material.

Ideally, PEEK should be printed directly in its semicrystalline form.”

Controlling crystallinity is particularly important in PEEK 3D printing, as it can significantly affect the final mechanical and thermal properties of the printed component.

Future Applications of High-Performance Polymers in 3D Printing

High-performance engineering polymers are increasingly used in advanced industrial applications where conventional plastics cannot meet demanding technical requirements.

Materials such as PEEK, PPS, and PEI (ULTEM) are particularly relevant in industries requiring high mechanical strength, thermal stability, and chemical resistance.

Dario concludes:

“When it comes to super engineering polymers, beyond the aerospace and medical sectors, one particularly diverse industry where I see clear growth opportunities is industrial automation.”

The growing adoption of additive manufacturing technologies is opening up new possibilities for the use of advanced thermoplastic materials in industrial components and specialized applications.

The Future of Polymers and Sustainable Materials in 3D Printing

The world of polymers for 3D printing continues to evolve, driven by the development of new materials, improved processing technologies, and increasing attention to environmental sustainability.

From traditional thermoplastics to advanced engineering polymers, the range of available materials continues to expand, creating new opportunities for industrial applications.

At the same time, recycled polymers, bioplastics, and innovative recycling technologies are becoming increasingly important in the development of more sustainable additive manufacturing processes.

We would like to thank Dario Negrelli Pizzigoni, Founder of TreeD Filaments, for his time and for sharing his insights into the polymer industry, a sector that still offers significant opportunities for development both today and in the future.