Recycled SEBS: regrind, re-granulate or off-grade? A buyer’s guide

Published on 12 October 2026

Recycled SEBS: regrind, re-granulate or off-grade? A buyer’s guide

“I need some recycled SEBS.” We hear it often. And our first question is always the same: in which form?

Because “recycled SEBS” isn’t a single product. It’s a family of products that — same polymer — differ in price, in consistency and in what you can actually do with them in production. Pick the wrong form and you either overpay or end up with a material your process can’t handle.

This guide lines up the three main forms — regrind, re-granulate and off-grade — and helps you work out which one to ask for before you buy.

The three forms of recycled SEBS

Regrind (macinato)

This is SEBS from production scrap — typically line start-up and shutdown, offcuts, out-of-production parts — broken down into irregular flakes by a mill. It’s the rawest form and, as a rule, the cheapest. It looks non-uniform, with fragments of varying size and colour; consistency depends on how the stream was sorted upstream. It’s made for anyone reintroducing it into a process that already includes a melting or regrinding step: extrusion, moulding with regrind, compounding.

A concrete example: our ELASTOGEO SEBS005-MP is a regrind (8 mm) from post-industrial scrap, around 60 Shore A, with good damping and very good cold flexibility.

More information about our SEBS regrind

Re-granulate (rigranulato)

This is SEBS that, after recovery, is re-melted and extruded into uniform pellets. The extra step has a cost — so the price is higher than regrind — but in return you get a material that is regular in shape, feeds smoothly through hoppers and dosers, and behaves predictably batch to batch. It’s the right form when you need steady feeding and don’t want (or can’t) handle irregular flakes.

More information about our regranulated SEBS

Off-grade (prime out of spec)

This isn’t recycling in the strict sense. Off-grade is prime virgin material that falls outside commercial specification: a colour drift, one parameter slightly out of range, overproduction, a formulation change. Performance is close to virgin, well above regrind, at a price below prime. It’s the choice for anyone after near-virgin performance on a budget who can live with intermittent availability — off-grades come and go.

What actually changes: price, consistency, processability

For the same polymer, the three forms sit at three different points on the price / consistency / ease-of-use triangle:

FormPriceBatch-to-batch consistencyTypical use
RegrindLowestVariableCompounding, regrind blends, extending compounds
Re-granulateMidGoodDirect use where regularity matters
Off-gradeMid-highHigh (it’s prime)Replacing virgin at a lower cost

Regrind needs a melting or regrinding step before use; re-granulate is ready for hoppers and dosers; off-grade behaves like virgin. The more regularity you want, the higher the price climbs.

Which form for which need

  • Already have regrinding or compounding in your process? Regrind is often the most cost-efficient choice.
  • Feeding moulding or extrusion directly, where regularity is critical? Re-granulate saves you dosing headaches.
  • Need near-virgin performance at a lower cost? Consider off-grade, factoring in its on-and-off availability.

No form is “better” in absolute terms: the best one is whatever your process can handle at the lowest cost.

How to qualify a lot before buying

Before closing the deal, always ask for:

  • The datasheet with typical values: hardness, density, MFR, elongation at break.
  • The origin: post-industrial (PIR) or post-consumer (PCR)? PIR, from production scrap, is generally cleaner and more traceable.
  • The regulatory status: a serious recyclate is qualified as a secondary raw material (in Italy, UNI 10667-1 and Legislative Decree 152/06 art. 184-ter). That’s what separates a product from waste.
  • A sample, to qualify on your real process. Datasheet figures are typical: the final test is your own line.

Where recycled SEBS is used

Recycled SEBS fits well where you need softness, damping and cold flexibility without the extreme performance of virgin material: damping elements, moulded elastic parts, modification of other thermoplastics, soft-touch components. You’ll find the available forms and grades on our Thermoplastic Elastomers page.

In short

Regrind, re-granulate, off-grade: same SEBS, three different answers to three different needs. Define your constraint first — cost, regularity or performance — and the form almost picks itself.

Want to work out which form is right for your application? We can send you the datasheet and a sample. Write to us at info@gianeco.com.